Junction Enclosure

 
Click to enlarge   Howard Industries’ junction enclosures are designed to provide a rugged, tamper-resistant housing for multipoint medium-voltage junction modules used in connection, looping, or tapping applications.

Junction enclosures are available for both single-phase and three-phase systems.
Click to enlarge
 
Ratings
Not Applicable

 
Standard Features
• Mild steel all-welded construction
• Electrostatically applied polyester powder primer with
  polyurethane topcoat; enclosure color is
  Munsell 7GY3.29/1.5 green; junction mounting plate color is
  Munsel 5BG7.0/0.4 gray
• Stainless steel handle, padlock provision, recess cup, hinge pins and barrels
• Silicon bronze pentahead security bolt
• Rounded edges for safety
• Lifting provisions
• Grounding provisions
• Junction mounting plate with provisions for mounting junction modules
• Cabinet sizes available for single-phase and three-phase
  applications, accommodating optional 2-, 3-, 4-, 5-, or 6-point
  junctions rated 15, 25, or 35 kV, at 200 or 600 Amps.
• Cabinet meets requirements of ANSI C57.12.28 (American
  National Standard, Pad-Mounted Equipment--Enclosure Integrity)
• RUS accepted designs

 
Optional Features
• Stainless steel all-welded construction meeting requirements
  of ANSI C57.12.29 (American National Standard, Pad-Mounted
  Equipment--Enclosure Integrity for Coastal Environments)
• Fault indicator provisions
• Hold down cleats
• 2-, 3-, 4-, 5-, or 6-point junctions rated 15, 25, or 35 kV,
  at 200 or 600 Amps.
 
 
Terms of Use             Privacy Policy             About Us             Contact Us             Careers             Facebook             California Supply Chains Act
601-425-3151      |       (601) 649-8090 (fax)       |       Email       |       HI Employee Weather Information       |       © 2000 - 2017 Howard Industries, Inc. All Rights Reserved